非奇异单圈图的刻划

边数等于顶点个数的连通图称为单圈图.本文修正了文献[1]中关于奇异单圈图的充要条件,并且利用该条件证明了文献[2]中一个关于非奇异单圈图的猜想.     

Synthesis and magnetic properties of multilayer Ni/Cu and NiFe/Cu nanowires

Highly ordered composite nanowires with multilayer Ni/Cu and NiFe/Cu have been fabricated by pulsed electrodeposition into nanoporous alumina membrane. The diameter of wires can be easily varied by pore size of alumina, ranging from 30 to 100 nm. The applied potential and the duration of each potential square pulse determine the thickness of the metal layers. The nanowires have been characterized by transmission electron microscopy (TEM), magnetic force microscopy (MFM), and vibrating sample magnetometer (VSM) measurements. The MFM images indicate that every ferromagnetic layer separated by Cu layer was present as single isolated domain-like magnet. This technique has potential use in the measurement and application of magnetic nanodevices.     

Practical stopping criteria for validating safety-critical software by estimating impartial reliability

In this research, we investigate stopping rules for software testing and propose two stopping rules from the aspect of software reliability testing based on the impartial reliability model. The impartial reliability difference (IRD-MP) rule considers the difference between the impartial transition-probability reliabilities estimated for both software developer and consumers at their predetermined prior information levels. The empirical–impartial reliability difference (EIRD-MP) rule suggests stopping a software test when the computed empirical transition reliability is tending to its estimated impartial transition reliability. To insure the high-standard requirement for safety-critical software, both rules take the maximum probability (MP) of untested paths into account.     

Numerical flow visualization of first cycle and cyclic motion of a rigid fling-clapping wing

A flow visualization of the two-dimensional rigid fling-clap motions of the flat-plate wing is performed to get the knowledge of fling-clapping mechanism that might be employed by insects during flight. In this numerical visualization, the time-dependent Navier-Stokes equations are solved for two types of wing motion; ‘fling followed by clap and pause motion’ and ‘cyclic fling-clapping motion’. The result is observed regarding the main flow features such as the sequential development of the two families of separation vortex pairs and their movement. For the ‘fling followed by clap and pause motion’, a strong separation vortex pair of counterrotation develops in the opening between the wings in the fling phase and they then move out from the opening in the following clap phase. For ‘the cyclic fling-clapping motion’, the separation vortex pair developed in the outside space in the clap phase move into the opening in the following fling phase. The separation vortex pair in the opening developed in the fling phase of the cyclic motion is observed to be stronger than those of the ‘fling followed by clap and pause motion’. Regarding the strong fling separation vortex and the weak clap separation vortex above it in the opening, the flow pattern of the fling phase of the cyclic fling and clap motion is different to that of the fling phase of the first cycle. The flow pattern of the third cycle of the cyclic fling-clapping motion is observed to be almost same as that of the second cycle. Therefore, a periodicity of the flow pattern is established after the second cycle.     

Magnetic,structural and electrical properties of ordered and disordered Co50Fe50 films

Co₅₀Fe₅₀ films with thickness varying from 100 to 500 Å were deposited on a glass substrate by sputtering process, respectively. Two kinds of CoFe films were studied: one was the as-deposited film, and the other the annealed film. The annealing procedure was to keep the films at 400 °C for 5 h in a vacuum of 5×10⁻⁶ mbar. From the X-ray study, we find that the as-deposited film prefers the CoFe(1 1 0) orientation. Moreover, the body-centered cubic (bcc) CoFe(1 1 0) line is split into two peaks: one corresponding to the ordered body-centered tetragonal (bct) phase, and the other, the disordered bcc phase. After annealing, the peak intensity of the ordered bct phase becomes much stronger, while that of the disordered bcc phase disappears. The annealing has also caused the ordered CoFe(2 0 0) line to appear. When the amount of the ordered bct phase in Co₅₀Fe₅₀ is increased, the saturation magnetization (M_s) and coercivity (H_c) become larger, but the electrical resistivity (ρ) decreases. From the temperature coefficient of resistance (TCR) measurement, we learn that the bct grains in the CoFe film start to grow at temperature 82 °C.     

Anionic polymerization of star-shaped nylon 6 with a trifunctional initiator

The anionic polymerization of ?-caprolactam (CLM) has been shown to proceed at high reaction rate when catalyzed by metallic lactamates and initiated by acyllactams. The role of initiator and catalyst concentration on the process of ?-caprolactam anionic polymerization has been explored, with the aim of selecting the most suitable experimental conditions for reaction injection molding (RIM). The overall polymerization rates and physical properties for reaction injection molding of star-shaped nylon 6 homopolymer have been studied by the quasi-adiabatic process. In order to model the actual rapid molding conditions, time vs. temperature reaction profiles were measured, and the relative rates of polymerization subsequently determined from these data.     

Allocating unfunded liability in pension valuation under uncertainty

This paper studied the cost allocation for the unfunded liability in a defined benefit pension scheme incorporating the stochastic phenomenon of its returns. In the recent literature represented by Cairns and Parker [Insurance: Mathematics and Economics 21 (1997) 43], Haberman [Insurance: Mathematics and Economics 11 (1992) 179; Insurance: Mathematics and Economics 13 (1993) 45; Insurance: Mathematics and Economics 14 (1994) 219; Insurance: Mathematics and Economics 14 (1997) 127], Owadally and Haberman [North American Actuarial Journal 3 (1999) 105], the fund level is modeled based on the plan dynamics and the returns are generated through several stochastic processes to reflect the current realistic economic perspective to see how the contribution changed as the cost allocation period increased. In this study, we generalize the previous constant value assumption in cost amortization by modeling the returns and valuation rates simultaneously. Taylor series expansion is employed to approximate the unconditional and conditional moments of the plan contribution and fund level. Hence the stability of the plan contribution and the fund size under different allocation periods could be estimated, which provide valuable information adding to the previous works.     

单链表在离子发动机光学系统粒子模拟中的应用

 目前离子发动机光学系统数值模拟大多采用PIC方法，由于该方法需要跟踪单个粒子的运动，因此需要存储每个粒子的位置信息与运动信息。传统的粒子模拟程序中，保存粒子信息大多采用数组的方式，但是采用这种方式存在弊端，例如对粒子总数变化的自适应不好。基于此开发了一种使用链式存储结构的粒子模拟程序，该程序使用带头节点的单向链表存储粒子信息。使用基于链式存储结构的PIC方法对离子发动机光学系统进行了粒子模拟，验证了链式粒子信息存储方法在粒子模拟中的可用性。模拟表明：（1）在粒子模拟中采用链式存储结构存储粒子信息，无需预先指定最大粒子总数，程序可自适应粒子总数的变化，因此无需进行试算，节省了计算时间；（2）在粒子模拟中采用链式存储结构，由于不存在内存资源的浪费，因而可显著提高程序的存储效率与计算效率。     

Photoinduced Transformation between Charge Carrier and Spin Carrier in Polymers

By dynamical simulations, we show a transforming process between neutral soliton （spin carrier） and charged soliton （charge carrier） in polymers via photo-excitation, taking a polaron as the transitional bridge. It is photoinduced transformation between spin carrier and charge carrier. In this way, we demonstrate an access for polymers to be applied to spintronics.